Metrics loading
For priming lime-based decorative plasters
Need an advice?
Application:
facades, interiors
Composition:
aqueous dispersion of vinyl polymers
Consumption:
6-10 m²/l
+ additional specifications

It is used inside and outside the premises for priming gypsum, cement and lime-cement plaster, foundations of building bricks, concrete, gypsum plasterboards, asbestos cement and fiber cement boards. It is especially recommended to use for priming lime-based decorative plasters for the further uniform application of finishing mixes.

It is also intended for processing plates made of asbestos cement, as it binds asbestos fibers, preventing them from entering the air.

Features
  • Allows to evenly apply finishing mixes on lime-based decorative plasters
  • Excellent firming ability
  • Reduces base water absorption
  • Has good adhesion to various bases.
  • Organic Solvent Free
  • Environmentally friendly

 

Application technologies

The surface to be treated must be dry, free from dust, grease, tar. Shake or mix thoroughly before use. Apply by roller, brush, brush or spray. Recommended operating temperature: +5°C.

High-absorbent bases can be primed again. It is possible to apply paints, putties, glue to the primed base 24 hours after priming. Wash the tools with water after use.

 

Download materials (1)
Elf™ Catalogue
Catalogues – pdf (18.32 MB)

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.