Metrics loading
For decorative walls of limestone, gas/foam concrete, insulated with mineral wool, as well as for surfaces with a high degree of vapour permeability. Available in the light grey colour base.
Need an advice?
for exterior and interior use
a mixture of pigment fillers
2.5-2.8 kg/m²
+ additional specifications

Used for outdoor and indoor use. Can be tinted in various colors by universal dyes and by a computer coloring system. It is characterized by a high degree of vapor permeability, improved moisture resistance, as well as increased elasticity. It is used for decorative decoration of walls made of limestone, gas / foam concrete, insulated with mineral wool, as well as for surfaces with a high degree of vapor permeability.

  • Creates a structural surface
  • High hiding power
  • Allows you to get different textures depending on the application technique
  • Weatherproof, vapor permeable, water repellent
  • Hides base defects, resistant to mechanical damage
  • Has good adhesion to various bases.
  • Organic solvent free, environmentally friendly


Application technologies

Stir before use. The surface to be treated must be smooth, dry, free from dirt, dust, grease, moss, salts and primed with D 13 reinforcing primer. To increase moisture resistance, D 15 primer is recommended. or SP 18. Apply using a stainless steel plastering trowel on the size of the grain. The final drawing is created with a plastic plastering trowel when grinding the surface in the selected direction (from top to bottom, from left to right, crosswise or in circular motions).

Recommended operating temperature: at least +5°C. After use, wash the tools with water.


Download materials (1)
Elf™ Catalogue
Catalogues – pdf (18.32 MB)

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.