Used for outdoor and indoor use. Can be tinted by universal dyes and by a computer coloring system. It is used for finishing walls made of concrete, brick, lime-cement, cement plasters, gypsum surfaces, gypsum plasterboards and fiber cement boards.
Appearance: dense mass of white with quartz grains.
Composition: a mixture of fillers and various auxiliary enriching substances in an aqueous dispersion of an acrylic copolymer with the addition of marble grain and reinforcing fibers
Terms and conditions of storage: 18 months from the date of manufacture indicated on the lid, in sealed plastic containers at a temperature of +5°C to +30°C.
Creates a structural surface
Allows you to get different types of "pebble" texture depending on the application technique
Stir before use. The surface to be treated should be smooth, dry, free of dirt, dust, grease, moss, salts and primed with D 13 reinforcing primer. To increase moisture resistance, D 15 primer is recommended. To obtain good adhesion and uniform structural pattern, it is recommended to additionally apply D 17 quartz primer. Apply using a stainless steel plastering trowel on the size of the grain, then rub the surface with a plastic plastering trowel in a circular motion until a uniform granular structure is obtained.
Operating temperature: not lower than +5°С. Wash the tools with water after use.