Metrics loading
For the decoration of walls made of concrete, brick, lime-cement, cement plasters, gypsum surfaces, plasterboard and fiber cement boards
Need an advice?
Application:
for exterior and interior use
Composition:
mixture of excipients and excipients
Consumption:
2.4-2.8 kg/m²
+ additional specifications

Used for outdoor and indoor use. Can be tinted in various colors by universal dyes and by a computer coloring system. It is used for finishing walls made of concrete, brick, lime-cement, cement plasters, gypsum surfaces, gypsum plasterboards and fiber cement boards.

Features
  • Creates a structural surface
  • Allows you to get different types of "pebble" texture depending on the application technique
  • High hiding power, weather resistance
  • Hides base defects, resistant to mechanical damage
  • Good adhesion to various bases
  • Organic solvent free, environmentally friendly

 

Application technologies

Stir before use. The surface to be treated should be smooth, dry, free of dirt, dust, grease, moss, salts and primed with D 13 reinforcing primer. To increase moisture resistance, it is recommended to use D 15 hydrophobizing primer. To obtain good adhesion and even structural structure, it is recommended to additionally apply quartz primer D 17 or SP 17. Apply using a stainless steel plastering trowel on the grain size, then rub the surface with a plastic plastering trowel in a circular motion until a uniform granular structure is obtained. Recommended operating temperature: not lower than +5°С. Wash the tools with water after use.

Download materials (1)
Elf™ Catalogue
Catalogues – pdf (18.32 MB)

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.