It is used for decorative decoration of walls made of limestone, gas/foam concrete, insulated with mineral wool, as well as for surfaces with a high degree of vapor permeability. Available in the light grey colour base.
Used for outdoor and indoor use. Can be tinted in various colors by universal dyes and by a computer coloring system. It is used for decorative decoration of walls made of limestone, gas / foam concrete, insulated with mineral wool, as well as for surfaces with a high degree of vapor permeability.
Creates a structural surface
Allows you to get different types of "pebble" texture depending on the application technique
High hiding power, weather resistance, vapor permeability
Hides base defects, resistant to mechanical damage
Good adhesion to various bases.
Organic solvent free, environmentally friendly
Stir before use. The surface to be treated must be smooth, dry, free of dirt, dust, grease, moss, salts and primed with D 13 reinforcing primer. To increase moisture resistance, D 15 primer is recommended. To obtain good adhesion and even structural structure, it is recommended to additionally apply quartz primer S 18 or SP 18. Apply using a stainless steel plastering trowel on the grain size, then rub the surface with a plastic plastering trowel in a circular motion until a uniform granular structure is obtained. Recommended operating temperature: not lower than +5 °С. Wash the tools with water after use.