Metrics loading
Two-component water-based deep matt polyurethane varnish. Forms a finishing transparent, wearproof covering on various bases. Component A - 2.5 kg varnish; component B - 0.5 kg hardener
Base:
Need an advice?
Application:
interiors
Composition:
aqueous dispersions of acrylic copolymers
Consumption:
10-15 m²/l
+ additional specifications

Varnish Protect 2K Matt is a two-component, water-based, deep matt polyurethane varnish. Forms a transparent, hard-wearing finish on a variety of substrates. When applied to mineral substrates by wetting, it makes the final tone of the coating rich and expressive. Does not form "whitish haze" even when applied in several coats. The special viscosity makes it easy to distribute the varnish over extended areas of floors, while uniformly filling small cracks and unevenness of the base.

Varnish Protect 2K Matt has an extended pot life, which allows it to be applied evenly in any convenient way without the risk of stains and rolls, and also simplifies the planning of the workflow.

Special additives reduce the likelihood of glossy areas during use, while making the coating velvety to the touch. The finished coating is highly resistant to dirt, scratches and can be easily cleaned with household detergents.

In addition, the coating has excellent water resistance and is resistant to household chemicals.

Type: water-borne 2-component polyurethane varnish

Gloss level: matt

Drying time:

- dry to touch 4-6 hours;

- repainting interval 12 hours. No more than 2 layers in 24 hours;

- full cure 14 days.

Features
  • Deep matte for all viewing angles
  • Velvety texture, pleasant to the touch
  • Transparent, does not turn yellow
  • Easy and even application, no streaking
  • For floors and walls, for furniture and countertops.
  • For rooms with high humidity (bathrooms and showers)
  • Excellent adhesion to various substrates
  • High wear, water and chemical resistance
Application technologies

Substrate must be clean, dry, sound and suitable for finishing.

Old varnished or painted surfaces must be sanded with 400 grit paper and degreased.
Pre-dust the surface with a vacuum cleaner.
For ease of use, the varnish components can be mixed directly in the container with component A. To do this, pour the Elfllor Hardener Matt hardener into the container with component A and mix thoroughly with a mechanical mixer. Mixing ratio 5:1 by weight. Mixing should be carried out for at least 5 minutes to obtain a homogeneous coating without spots and craters.

Application is carried out in any convenient way (brush, roller, pneumatic spray). To obtain an optimal protective effect, it is recommended to apply the varnish in at least 2 coats.
Lime and cement substrates must be pre-treated with a special primer.

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.