Primer BiozidGrund

The surface must be clean, dry, smooth, load-bearing and meet the conditions of preparation in accordance with the requirements. Irregularities, cracks or chips must be repaired with the use of Elf TM products.

If you find areas damaged by mold, mildew, algae or fungi, you need to find out the reasons for their formation and take measures to eliminate them. Areas damaged by microorganisms must be cleaned mechanically.

Antiseptic primer "BiozidGrund" should be applied with a paintbrush or roller undiluted in one or two passes until the surface is completely saturated. Do not allow the formation of a shiny layer after drying.
Tools must be rinsed with water after work or during long breaks. During the robot, the surface must be protected from direct sunlight and drafts until the material is completely dry.