Metrics loading
Decorative granules
Need an advice?
Application:
interiors, facades
Composition:
Natural fired fractionated clay
Consumption:
0,16 kg/m²
+ additional specifications

A dry granulated additive based on fired clay and fragments of ancient ceramics — bricks, tiles, and pots.
It is used as a decorative component in the “VabiO” mixture to create striking decorative finishes with a unique antique character.
Suitable for both interiors and exteriors, it helps form aesthetically refined and architecturally appealing surfaces.

In the philosophy of ToClay, this additive is a bridge between the past and the present. Fragments of ancient ceramics, tempered by fire and centuries, come alive in new spaces, imparting a sense of time, authenticity, and the inexhaustible energy of the material.

Features
  • High strength due to the synergy of lime and ceramics (pozzolanic effect)
  • Effect of antique plaster
  • Non-combustible
Application technologies

The contents of the “VABIO” package (15 kg) should be carefully poured into a container with 4.5÷5.5 liters of clean water at room temperature and mixed with a low-speed electric mixer until a homogeneous consistency is obtained. Then, add the required amount of terracotta granules “Cocciopesto”.

Leave the mixture for about 10 minutes and mix again. If necessary, the consistency may be adjusted with a small amount of water.

Depending on atmospheric conditions, the pot life of the mixture is approximately 2 hours from the moment of mixing with water. Once the mixture has started to set and lose its workability, it must not be re-diluted with water for further use.

Attention! Always take into account the exact amount of water indicated on the package when preparing the mixture. For machine application, follow the equipment operating instructions.

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.