Primer GipsGrund

The surface must be clean, dry, smooth, load-bearing and meet the conditions of preparation in accordance with the requirements.

Suitable bases for application:
- gypsum plasterboards of all types (GKL),
- gypsum-based putties;
- gypsum-based plasters;
- prefabricated gypsum blocks;
- gypsum-based materials for floor leveling.

Contaminants and substances that adversely affect adhesion must be removed, and unevenness or chips must be leveled with appropriate gypsum materials.

GipsGrund should be applied undiluted with a paintbrush or brush in one or two passes until the surface is completely saturated. Do not allow the formation of a shiny layer after drying.
Tools must be rinsed with water after work or during long breaks. During the robot, the surface must be protected from direct sunlight until the material is completely dry.

During application and drying, the ambient air and substrate temperature must not fall below +5°C and rise above +30°C. Do not apply in direct sunlight, strong wind, fog or high humidity.