Metrics loading
Ready-to-use universal white primer.
Packing:
Need an advice?
Application:
interiors, facades
Composition:
aqueous dispersion of vinyl copolymer
Consumption:
1 l/3-4 m²
+ additional specifications

Ready-to-use universal white primer. It is a mixture of pigments, fillers, and various additives in an aqueous dispersion of vinyl copolymer with the addition of fine quartz grain (0.2 mm).

Used for interior and exterior applications as a universal primer for decorative paints and plasters, as well as for facade coatings. Applied to gypsum boards and fiber cement boards, concrete, brick, cement and lime-cement plasters. Recommended for use under dry construction mixes (TM ToClay), as well as under lime-based decorative plasters.

Features
  • Excellent coverage
  • Eliminates differences in texture and color of the substrate
  • Optimizes adhesion of the finishing layer to the substrate
  • Weather-resistant
  • Good adhesion
  • Free from organic solvents
  • Environmentally friendly
Application technologies

Surface preparation:
The surface to be treated should be cleaned from dirt, dried, and degreased.

Application:
Stir thoroughly before use. Depending on the substrate, up to 10% water can be added. Apply using a roller or block brush. Drying time is 3–4 hours at a temperature of (20 ± 2)ºC. For better coverage, it can be applied in two coats. Recommended application temperature is not below +5ºC. Clean tools with water after use.

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.