Mix all three components in the proportion: 0.125 kg of component A + 0.125 kg of component B + 1 kg of component C. Use a mechanical mixer with a spiral stirrer for mixing. For best results, first mix components A and B thoroughly until a homogeneous, creamy emulsion is obtained, then gradually add component C, with constant stirring, until a homogeneous mixture without lumps is obtained. The components can be mixed by hand. To maintain the homogeneity of the mixture, it is recommended to alter it periodically. If it is necessary to reduce the viscosity, about 3% of water can be added to the finished mixture. For coating large extended areas, it is recommended to add 5-8% water to the finished mixture. Pot life of the mixture is about 1 hour, at a temperature of 25 ° C and a relative humidity of 60% Drying time "to touch" is about 6-8 hours, for sanding - about 24 hours.