Main Product Catalog Elf Decor™ Decorative CoatingsTesoro

01 / 01

TESORO is a unique decorative coating for interior works that was designed especially for creating interesting and unusual design solutions.

Packing:

Need an advice?

Application:

interiors

Composition:

mineral fillers, acrylic copolymers

Consumption:

5-6 m²/l

+ additional specifications

TESORO is a unique decorative coating for interior works that was designed especially for creating interesting and unusual design solutions. This product will perfectly fit classic interiors as well as any ultra-modern space.

To achieve the desired color of TESORO coating just add the selected TESORO TONER dye as well as add metallized pigments TESORO GOLD or TESORO SILVER if necessary to the container of TESORO base.

Features

Multi-pattern coating (depending on the application technique)
High strength
Changes shades depending on the lighting and angle of view (if metallized pigments are used)
Repairable
Withstands cleaning with detergents
Hides defects in surface preparation

The possibility of restoration

metallic

Washable

High strength

Hides defects of preparation

Changing shades

smooth

Apply special primer Quartz Primer Nero (fig. 1) on the prepared surface. Wait until it is completely dry (4-5 h).

To achieve the color that was previously selected from the catalog, according to the recipe, you need to add the selected colorant TESORO TONER (75 ml) to TESORO decorative coating base (2.5 l), and add metallised pigment TESORO GOLD or TESORO SILVER (250 mL) to obtain gold or silver shimmer respectively. Gently stir the decorative coating.

IMPORTANT: do not use an electric mixer for stirring so as not to shatter the structure of the material.

Apply TESORO using a flat wide shortened brush crosswise downward randomly spreading the product over the entire surface (fig. 2).

Press the pigmented flakes lightly using metallic plastering trowel by making multi-directional or circular movements and distribute the flakes over the surface when moisture is stabilized little (after 10-15 min.) (fig. 3), thus obtaining the desired decorative effect.