Metrics loading
Highly adhesive acrylic primer for exterior and interior works
Packing:
Need an advice?
Application:
facades, interiors
Composition:
polymer and mineral additives
Consumption:
300 g/m²
+ additional specifications

Ready-to-use acrylic primer Acryl-PutzGrund 117 for preparation of bases before drawing of plaster and other finishing coverings of ThermoELF.

Features
  • Equalizes water absorption of a finishing basis and provides uniform hardening of a plaster covering
  • Significantly improves the quality of formation of decorative textures such as "bark", "lamb", etc.
  • To create a contact layer between the coating and the substrate
  • Recommended for conservation of thermal insulation systems
  • Capable of diffusion of water vapor
  • Resistant to precipitation
  • Recommended for toning
  • Environmentally friendly
Application technologies


The surface must be clean, dry, level, capable of bearing the load and suitable for preparation in accordance with the specified requirements.

Dirt and substances that negatively affect adhesion must be removed, and unevenness or chips must be leveled with suitable materials, for example Klebe-und ArmierungsMasse AM 195 or KlebeMasse KM 193. The primed base looks like a white, rough surface. Before starting work, it is necessary to take measures to protect the adjacent surfaces, glass, ceramics, varnished surfaces, clinker bricks, natural stone, metal, wood covered with blue or enamel.

Before use, the Acryl-PutzGrund 117 primer paint must be thoroughly mixed with a low-speed drill with a special nozzle. If necessary, to regulate the consistency, the primer paint can be diluted with water, but not more than 5% of water from the total mass of the material.

Acryl-PutzGrund 117 must be applied with a paint roller, brush or paintbrush. After completing work or during long breaks, the tools must be thoroughly cleaned and rinsed with water. During work, the surface must be protected from precipitation, fog, strong wind or direct sunlight until the material is completely dry. Primer splashes and smudges on surfaces must be removed immediately or washed off with water. Acryl-PutzGrund 117 primer is not suitable for horizontal surfaces that are exposed to constant exposure to water.

During application and drying, the temperature of the ambient air and the substrate must not fall below +5°C and rise above +30°C. Do not apply in direct sunlight, strong wind, fog, high humidity or when expecting frost in the next 24 hours.

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.