Metrics loading
Deep penetrating fixing primer
Packing:
Need an advice?
Application:
interiors, facades
Composition:
Aqueous emulsion of styrene-acrylic resins with a
Consumption:
~ 150 g/m²
+ additional specifications

A ready-to-use deep-penetrating fixing primer for the preparation of mineral surfaces (concrete, brick, ceramic blocks, cement and gypsum plasters, gas and foam concrete, magnesite and slabs, GKL, TSP) before furnishing, finishing and painting works inside and outside buildings.

Features
  • The smallest size of dispersion particles provides the best binding capacity
  • Equalizes the water absorption of the mineral base and ensures uniform drying of the coating
  • Strengthens the base and creates an adhesive layer for the next coating
  • Does not contain organic solvents
  • Able to diffuse water vapor
  • Resistant to precipitation
  • Ecologically clean
Application technologies

The surface must be clean, dry, level, able to bear the load and suitable for preparation conditions as required. Dirt and adhesion-impairing substances must be removed and uneven or chipped surfaces smoothed out with suitable materials, e.g. Klebe- und ArmierungsMasse AM 195 or KlebeMasse KM 193.

Execution robot

TiefGrund D13 fixing primer should be applied undiluted with a paintbrush or brush in one or two passes until the surface is completely saturated. Avoid the formation of a shiny layer after drying.
After work or during long breaks, the tools must be rinsed with water. During work, the surface must be protected from precipitation, fog, strong wind and direct sunlight until the material is completely dry.

 

Download materials (1)
Elf ™ Hygiene Certificate
Certificates – zip (13 MB)

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.