MURANO is a Venetian plaster created with the use of natural mineral fillers and acrylic binders that is suitable for interior work. This luxurious material creates the effect of polished marble. A special formula allows you to achieve saturated tones with economical dye consumption. Tinting is performed by use of universal dyes in an amount of no more than 6% of the mass of the material.
High resistance to dirt
Possible cleaning with alkaline detergents
Different patterns can be achieved depending on the application technique
Apply QUARTZ PRIMER or previously tinted DECOR PRIMER on a prepared and previously treated with D 11 Elf™ Primer surface (fig. 1).
MURANO should be applied on a perfectly prepared surface. The material should be stirred thoroughly and the selected dye should be added or a computer tinting system should be used before applying. Apply the first layer of material using a spatula or a stainless steel plastering trowel by spreading the product over the entire surface and creating your unique pattern at the same time (fig. 2). For more expressive texture small flaws are allowed.
Treat the surface using a sandpaper and apply the second layer of coating by making alternating strokes in different directions after the complete drying of the surface (4-6 hours) (fig. 3). You can proceed to the application of the third layer by making thin strokes in different directions and polishing the surface at the same time in approx. 2-3 hours. It is allowed to add up to 10% of water to the product when applying the 3 rd layer .
It is recommended to treat the surface after the complete drying using DECOR WAX MURANO, DECOR WAX MURANO AQUA or DECOR WAX for a more «in-depth» pattern and higher gloss as well as to enhance the "stucco" effect. Decorative wax should be applied using a spatula by making multi-directional movements with a thin layer (fig. 4).