Metrics loading
For interior and exterior use as a topcoat for leveling surfaces
Need an advice?
Application:
for exterior and interior use
Composition:
mixture of excipients and substances
Consumption:
0,8 - 1,0 kg/m²
+ additional specifications

It allows you to get perfect surface -  white, smooth, ready for painting, easy to sand. It is applied as a finishing layer for interior and exterior works for leveling. It behaves perfectly when used in wet rooms. It is applied to concrete, building brick, rigid foam, gypsum, lime and cement plasters. It is especially recommended as a topcoat for surfaces that have previously been puttered with the D 200 facade putty.

Appearance: thick, viscous mass of white colour

Composition: a mixture of fillers and various auxiliary materials in an aqueous dispersion of synthetic polymers.

Terms and conditions of storage: 18 months from the date of manufacture indicated on the lid, in sealed plastic container at a temperature of +5°C to +30°C.

 

Features
  • Easy and even application
  • Well polished
  • Resistance to mechanical damage
  • Has good adhesion to various bases.
  • Organic Solvent Free
  • Environmentally friendly

 

Application technologies

The surface to be treated must be free of dust, dirt, moss, old coatings, peeled off and pre-treated with D 13 or D 15 primer. Stir thoroughly before use. Apply to the surface with a layer of 1-2 mm.

To correct deep surface defects, it is recommended to use D 200 putty as the first layer. Operating temperature: from +5°C to +35°C. Apply with a metal spatula. Wash the tools with water after use.

Download materials (1)
Elf™ Catalogue
Catalogues – pdf (18.32 MB)

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.