Metrics loading
Allows you to get a perfectly smooth surface, ready for painting
Need an advice?
Application:
for exterior and interior use
Composition:
a mixture of fillers, copolymers
Consumption:
1-1,5 kg/m²
+ additional specifications

Allows you to get a perfectly smooth surface, ready for painting, sanding with abrasive paper or mesh.

It is used for both interior and exterior works for leveling and repairing defects in concrete, porous concrete, building brick, rigid foam, gypsum, lime and cement plasters. Very effective when applied in wet areas.

 

Features
  • Easy and even application
  • Well polished
  • Shockproof
  • Has good adhesion to various bases.
  • Organic Solvent Free
  • Environmentally friendly

 

Application technologies

The treated surface must be cleaned of dust, dirt, moss, old coatings that peel off, and pre-treated with D 13 or D 15 primer. Stir thoroughly before use. If necessary, dilution with water is allowed (no more than 5%). Putty should be applied to the surface with a layer of up to 5 mm. In case of significant irregularities - in several layers. Drying time of one layer: 4-6 hours.

Operating temperature: from +5°C to +35°C. Apply with a metal spatula. After finishing work, wash the tool with water.

 

Download materials (1)
Elf™ Catalogue
Catalogues – pdf (18.32 MB)

Where to buy

Click to show map
Get the address of your nearest dealer
If there is no showroom in your city, we will help you to buy our products from our dealers, in the most convenient place for you.