Ready-to-use white quartz coating for indoor and outdoor use. Depending on the application method, it is possible to obtain various types of relief patterns. Can be tinted by universal dyes and by a computer coloring system. It is used for finishing walls made of concrete, brick, cement, lime-cement plasters, gypsum surfaces, plasterboard and fiber-cement plates.
Mix the plaster thoroughly before use. The surface to be treated should be smooth, dry, free from dirt, dust, grease, moss, salts and primed with D 13 reinforcing primer. To increase moisture resistance, D 15 primer is recommended. To obtain good adhesion and uniform structural pattern, it is recommended to additionally apply D 17 quartz primer .Apply using a stainless steel plastering trowel on the size of the grain, then smooth with a spatula or grater. Also, the final drawing can be applied with a structural roller. Recommended operating temperature: not lower than +5°С. Wash the tools with water after use.