STUCCO ART is applied to a perfectly prepared surface. Before application, add the dye selected from the catalog or use a computer coloring system, and mix the product thoroughly. Apply the first layer with a stainless steel spatula or a small one, setting the original pattern. When applying the first layer, small inflows are allowed to obtain a more characteristic "Venetian" pattern.
Treat the surface with sandpaper after the first layer is completely dry (4-6 hours). Apply a second coat of STUCCO ART, alternating strokes in different directions. In 2-3 hours it is possible to start drawing the third layer by multidirectional thin strokes, at the same time carrying out polishing of a surface. When applying the finishing layer, the addition of up to 10% of water is allowed.
After complete drying, it is recommended to treat the surface with DECOR WAX MURANO AQUA or DECOR WAX wax to give a deeper pattern, gloss, as well as to enhance the "stucco" effect. The wax is applied with a metal spatula on the surface in a thin layer in different directions. To obtain a perfect glossy surface, we recommend using a polishing tool with a special nozzle made of natural wool.